Inlet manifold Mini COOPER S Weber 40/45 DCOE Dellorto DHLA swan neck intake
$ 195.7
Part number: ST3507
Manufacturer: FAJS
Inlet Manifold Mini Cooper S Weber 40/45 DCOE Dellorto DHLA Swan Neck Intake
This swan-neck inlet manifold connects a Weber DCOE or Dellorto DHLA carburetor to the Mini Cooper S engine intake system. Its purpose is to provide the carburetor-to-cylinder-head mounting interface while directing the air-fuel mixture into the engine. Swan-neck intake manifold for Mini Cooper S applications.
The manifold is intended for Weber 45 DCOE and Dellorto 45 DHLA carburetors, with additional application coverage for Weber 38, 40, 45 and 48 DCOE carburetors and Dellorto 40 and 45 DHLA carburetors. The manifold shape and mounting-hole position are critical because they determine alignment with the cylinder-head interface, carburetor position and available clearance.
A mismatched manifold can cause mounting interference, poor port alignment, gasket sealing problems or an incorrect carburetor angle. It should therefore be verified against the engine, carburetor body and removed manifold before installation. The manifold itself does not calibrate the main circuit, progression or enrichment circuits; those functions remain controlled by the selected carburetor and its internal components.
This replacement part is suitable for carburetor service and restoration work where the original component is worn, damaged, or missing.
Reference/MPN: st3507.
Technical role: Swan-neck inlet manifold connecting a Mini Cooper S engine intake system to Weber DCOE or Dellorto DHLA carburetors.
Service relevance: Provides the carburetor-to-cylinder-head mounting interface while controlling mixture-entry alignment, sealing and available clearance.
What Is Included
- Inlet manifold, MPN ST3507
Important Fitment Note
Verify the carburetor family and body code before purchase: Weber DCOE and Dellorto DHLA interfaces are not automatically interchangeable across all models. Confirm the required carburetor size range, swan-neck orientation, port geometry, mounting-hole spacing and gasket face. Check the mounting interface, thread and seat style against the engine and carburetor, and compare the manifold directly with the removed part.
Compare the shape and screw positions with your existing manifold before fitting, especially where engine clearance or carburetor alignment is limited.
What you see is what you get
Show all parts