Throttle Spindle Shaft DELLORTO 40/45/48 DHLA part numbers 8604/8352/7668
$ 62
Part number: 7668
Made in: EU
Throttle Spindle Shaft DELLORTO 40/45/48 DHLA — MPN 7668, Part Numbers 8604/8352/7668
This throttle spindle shaft is used in Dellorto 40/45/48 DHLA carburetors to transmit throttle-linkage movement to the throttle plates. A worn or damaged spindle can contribute to shaft play, unwanted air leakage around the throttle-shaft area, inconsistent idle control, and imprecise throttle response. MPN 7668
The shaft-to-bearing interface should provide a press fit, also known as an interference fit, with the shaft diameter slightly larger than the bearing bore. During service, use a hydraulic or mechanical press with a suitable pipe or tube sleeve so installation force is applied to the bearing’s inner race rather than the rolling elements. Lubricate the shaft before assembly. Freezing the spindle overnight can reduce its diameter temporarily and ease installation; heating the bearing in hot oil is an optional complementary step.
If the installed shaft has excessive clearance in the bearing, a suitable retaining or gap-filling compound such as a Loctite product may help secure the interface, provided the product is appropriate for the application and the bearing and shaft are correctly aligned.
This replacement part is suitable for carburetor service and restoration work where the original component is worn, damaged, or missing.
Reference/MPN: 7668.
Technical role: Throttle spindle shaft for Dellorto 40/45/48 DHLA carburetors, transmitting linkage movement to the throttle plates.
Service relevance: Replacement of a worn or damaged shaft can address shaft play, throttle-shaft air leakage, inconsistent idle control, and imprecise response.
What Is Included
- One Dellorto throttle spindle shaft, MPN 7668
- Made in EU.
Important Fitment Note
Verify that your carburetor is from the Dellorto 40/45/48 DHLA family and compare the required identification with MPN 7668 and the related part numbers 8604 and 8352. Before ordering, compare the removed shaft with the replacement for overall geometry, throttle-plate attachment details, linkage or lever interface, bearing-seat arrangement, and any threaded, keyed, or other mating features.
Do not rely on carburetor family alone; confirm the code marking and physical interfaces against the removed part before installation.
What you see is what you get
Show all parts