Emulsion Tube 7772.8 for Dellorto 40/45/48 DHLA
$ 19.8
Part number: 7772.8
Made in: EU
Emulsion Tube 7772.8 for Dellorto 40/45/48 DHLA
The 7772.8 emulsion tube is used in the main circuit of Dellorto DHLA carburetors to combine fuel with air from the air-correction system before the mixture reaches the main circuit outlet. Its internal drillings and calibration influence main-circuit progression, mixture behavior through the operating range, and transient response as airflow increases.
MPN 7772.8 is identified for Dellorto 40, 45, and 48 DHLA carburetors. The supplied calibration comparison places 7772.10 on the lean side, followed by 7772.8, while 7772.5, 7772.7, and 7772.6 provide richer alternatives. The 7772.5, 7772.7, and 7772.6 variants are identified for racing-engine applications.
A blocked, damaged, worn, or incorrect emulsion tube can disturb fuel emulsification and create inconsistent main-circuit behavior, including hesitation, uneven acceleration, or mixture changes that cannot be corrected reliably with jet changes alone. Final calibration also depends on the main jet, air corrector, venturi, float setting, and fuel level.
This replacement part is suitable for carburetor service and restoration work where the original component is worn, damaged, or missing.
Reference/MPN: 7772.8.
Technical role: 7772.8 emulsion tube for the main circuit of Dellorto 40/45/48 DHLA carburetors, combining fuel with air from the air-correction system.
Service relevance: Replacement is relevant for a blocked, damaged, worn, or incorrect tube causing inconsistent main-circuit behavior, hesitation, or uneven acceleration.
What Is Included
- Dellorto 7772.8 emulsion tube
- Made in EU.
Important Fitment Note
Verify that the carburetor family is Dellorto DHLA and that the existing tube carries the 7772.8 marking or matching identification. Compare the replacement with the removed part for overall length, external diameter, hole pattern, end profile, and seating/interface arrangement. Confirm that it matches the carburetor body and the installed main-jet and air-corrector system before assembly.
Do not select the tube by carburetor size alone; compare the code and physical geometry with the removed part.
What you see is what you get
Show all parts