AIR CORRECTOR JET 155 FAJS for WEBER 40/45 DCOE 40/44/48 IDF IDA
$ 2.3
Part number: ST4146
Manufacturer: FAJS
AIR CORRECTOR JET 155 FAJS for WEBER 40/45 DCOE and 40/44/48 IDF/IDA
This FAJS air corrector jet is marked 155 and is used in the upper section of compatible Weber-pattern carburetors to meter correction air into the main circuit through the emulsion tube. Its calibration influences the fuel curve as airflow and engine speed increase, helping determine high-load mixture behavior. It is not an idle or progression jet, although an incorrect or obstructed air corrector can contribute to lean or rich operation in the upper portion of the main circuit.
155 air corrector calibration should be matched to the carburetor family, emulsion-tube arrangement, engine specification, and existing calibration strategy. The part is associated with Weber/FAJS DCOE, DCOM, DCO, IDF, IDA, DCN, DCNL, and EMPI HPMX applications. Exact interchangeability depends on the air-corrector interface and carburetor body, so confirm the original jet before installation.
This FAJS part was removed from an unused new FAJS carburetor. It is a FAJS sale item rather than a standard-offer component; inspect the jet and verify its calibration before use.
This replacement part is suitable for carburetor service and restoration work where the original component is worn, damaged, or missing.
Reference/MPN: ST4146.
Technical role: 155-marked FAJS air corrector jet for the upper main-circuit section of compatible Weber-pattern carburetors.
Service relevance: Its calibration affects high-load mixture behavior as airflow and engine speed increase, rather than idle or progression operation.
What Is Included
- One FAJS air corrector jet marked 155
Important Fitment Note
Verify the carburetor family and the code or marking on the removed air corrector before ordering. Compare the replacement with the original for overall geometry, shoulder and seating arrangement, threaded or press-fit interface, and the way it locates in the emulsion-tube/main-circuit assembly. Check the carburetor body marking and confirm whether the application is Weber/FAJS DCOE, DCOM, DCO, IDF, IDA, DCN, DCNL, or EMPI HPMX.
Do not rely on the 155 marking alone; compare the complete interface and removed part before installation. A correct-looking calibration number does not confirm compatibility if the jet family, seat style, or retaining arrangement differs.Show all parts