Carburetor AIR FILTER 85mm 3"1/2 cleaner for WEBER 35 DCNL$ 59.5 ‹ › ‹ › ‹ › ‹ › Part number: ST2782Made in: EUIncludes:Carburetor Air Filter 85 mm (3-1/2 in) for Weber 35 DCNL – MPN AFI10 This washable cotton air filter is intended for the air inlet of a Weber 35 DCNL carburetor. It helps prevent dust and debris from entering the carburetor throat while maintaining a clean air path for the main circuit, progression circuit, and transient response. A properly seated filter and gasket also help reduce the risk of unfiltered air entering around the carburetor interface. 85 mm (3-1/2 in) tall washable cotton air filter for Weber 35 DCNL. The filter is a serviceable intake component rather than a fuel-calibration part; it does not replace jet, emulsion-tube, or fuel-level adjustments. Clean and inspect it during carburetor servicing, especially where dirt contamination, restricted airflow, unstable response, or poor sealing is present. The formed or bent side may have slight waviness, and minor surface scratches may be present. These cosmetic or forming variations should be checked against the available clearance and sealing surface before installation. This replacement part is suitable for carburetor service and restoration work where the original component is worn, damaged, or missing. Reference/MPN: AFI10. What Is Included Washable cotton carburetor air filter, 85 mm (3-1/2 in) tall, for Weber 35 DCNLGasketMade in EU. Important Fitment Note Verify the carburetor family and model code before purchase: Weber 35 DCNL. Check that the AFI10 identification, 85 mm filter height, bent-side geometry, mounting interface, and gasket seating area match the existing assembly. Compare the filter opening, contact surface, clearance, and attachment arrangement with the removed part before installation. Do not rely on carburetor model alone; confirm the interface geometry and sealing arrangement against the original filter and gasket.What you see is what you getShow all parts