RacePro 40105 FUEL PUMP electric 12V Square Universal Facet replacement$ 56.6 ‹ › ‹ › ‹ › Part number: 40105RRacePro 40105R 12V Electric Fuel Pump – Facet 40105 Replacement Maximum working pressure: 2.5–3.5 psi. Flow capacity is up to 23 US gallons per hour or 19 UK gallons per hour. The pump is intended as a replacement for Facet 40105 applications, but exact vehicle and system compatibility must be verified before installation. Install the pump no higher than 12 inches (30 cm) above the bottom of the fuel tank. This mounting limit helps maintain a suitable inlet supply to the pump. Confirm the fuel-line routing, electrical polarity, fuse protection, mounting position, and carburetor pressure requirements during installation. Excessive pressure can raise the carburetor fuel level, contribute to float-valve leakage, or cause an over-rich condition, so the operating pressure must suit the specific fuel system. This replacement part is suitable for carburetor service and restoration work where the original component is worn, damaged, or missing. Reference/MPN: 40105R. Technical role: 12V electric fuel pump for Facet 40105 replacement applications, supplying carbureted fuel systems at 2.5–3.5 psi. Service relevance: Suitable as a replacement pump where the existing system uses the Facet 40105 reference and requires 8 mm fuel-line connections. What Is Included RacePro 40105R 12V electric fuel pump8 mm fuel-line unionsFuel filterInstallation manualWarranty Important Fitment Note Verify the required pump family and compare the Facet 40105 reference with the code marking on the removed pump or the original application. Check the fuel-line interface, 8 mm connection requirement, hose-barb geometry, electrical connections, mounting arrangement, and sealing or seat style where applicable. Confirm that the pump’s 2.5–3.5 psi working-pressure range is appropriate for the carburetor and fuel-pressure control system. Compare the replacement directly with the removed pump before installation, especially the inlet/outlet orientation and connection geometry. Also verify that the selected mounting position keeps the pump no higher than 12 inches (30 cm) above the bottom of the fuel tank.Show all parts
