Weber DCOE / EMPI Jet Inspection Cover with securing washer antiloss$ 18.5 ‹ › ‹ › ‹ › ‹ › ‹ › Part number: ST2152Made in: EUIncludes:Weber DCOE / DCOM / EMPI Jet Inspection Cover with Securing Washer and Anti-Loss Wing Nut This jet inspection cover installs in the top cover of compatible Weber DCOE, DCOM, and EMPI carburetors, providing access for service and calibration of the idle jets, emulsion tubes, main jets, and air correctors without removing the complete carburetor top cover. Provides direct access to the main and idle jet areas. The securing arrangement includes a stainless steel anti-loss washer and a wing nut with a drilled hole. Safety wire can be passed through the drilled hole and secured to help prevent the inspection cover from loosening or being lost due to engine vibration. This is particularly useful on competition, high-vibration, and frequently serviced carburetor installations where retaining the cover is important during operation. The part number is 32376.003. The cover is intended for Weber DCOE and DCOM carburetors in 38, 40, 42, 45, 48, 50, and 55 sizes, as well as EMPI applications using the same inspection-cover interface. Available color options are White/Silver or Yellow/Gold. If no color is specified, either color may be supplied. This replacement part is suitable for carburetor service and restoration work where the original component is worn, damaged, or missing. Reference/MPN: 32376.003. Technical role: Jet inspection cover for accessing the service and calibration area of compatible Weber DCOE, DCOM, and EMPI carburetors. Service relevance: Includes an anti-loss washer and drilled wing nut for retaining the cover during vibration and repeated servicing. What Is Included Jet inspection coverStainless steel anti-loss washerWing nut with drilled hole for safety-wire retentionMade in EU. Important Fitment Note Verify the carburetor family before ordering: Weber DCOE, Weber DCOM, or EMPI. Confirm the carburetor size and compare the code or marking with MPN 32376.003. Check the inspection-cover opening, cover shape, mounting interface, washer seating area, and wing-nut engagement against the removed original part. Compare the complete cover and retaining hardware with the parts removed from the carburetor before installation. Confirm that the cover seats correctly on the top cover and that the securing hardware aligns without forcing or altering the carburetor. The listed size range supports DCOE and DCOM applications, but the cover geometry and retaining interface should still be verified for the specific carburetor body.What you see is what you getShow all parts
