AIR CORRECTOR JET 205 FAJS for WEBER 40/45 DCOE 40/44/48 IDF IDA
$ 2.3
Part number: ST4148
Manufacturer: FAJS
AIR CORRECTOR JET 205 FAJS for WEBER 40/45 DCOE, 40/44/48 IDF and IDA Carburetors
FAJS air corrector jet marked 205, part number ST4148. The air corrector jet supplies the calibrated bleed air used by the emulsion and main fuel circuits. Its effect becomes increasingly relevant as airflow and engine speed rise, influencing high-speed mixture correction and full-throttle response. A mismatched air corrector can contribute to an overly rich or lean upper-rpm mixture, so calibration should be checked against the carburetor family, emulsion tube, main jet, engine specification, and existing setup.
Compatible carburetor families listed for this part include Weber/FAJS DCOE, DCOM, DCO, IDF, IDA, DCN, and DCNL, along with EMPI HPMX applications. The title also identifies Weber 40/45 DCOE and 40/44/48 IDF and IDA applications. Confirm the required jet designation and interface before ordering rather than relying only on carburetor model names. This item was removed from an unused new FAJS carburetor and is a non-standard FAJS sale item.
FAJS air corrector jet marked 205 — verify the calibration before installation.
This replacement part is suitable for carburetor service and restoration work where the original component is worn, damaged, or missing.
Reference/MPN: ST4148.
Technical role: FAJS air corrector jet marked 205 (MPN ST4148) supplying calibrated bleed air to the emulsion and main fuel circuits.
Service relevance: Its calibration influences high-speed mixture correction and upper-rpm response, so mismatch may contribute to a rich or lean mixture.
What Is Included
- FAJS air corrector jet marked 205, part number ST4148
Important Fitment Note
Verify the carburetor family and the required 205 calibration marking before installation. Compare the jet with the removed part, including its overall cylindrical geometry, retaining/interface arrangement, seat style, and threaded or non-threaded connection as applicable to the carburetor body. Confirm that the emulsion-tube and air-correction system use this style of jet; DCOE, IDF, IDA, DCO, DCOM, DCN, DCNL, and EMPI HPMX names alone do not establish exact fitment across every revision.
Match the marking and physical interface with the removed jet before fitting.Show all parts