Brass fuel hose tee 3 way pipe for carburetor fitting 8mm 5/16" + 3pcs clips$ 8.9 ‹ › Part number: ST2502Made in: EUIncludes:Brass Fuel Hose Tee 3-Way Carburetor Fitting 8mm 5/16" with 3 Clips - ST2502 This brass three-way fuel hose tee joins and branches three fuel-hose runs within a carburetor fuel system. It can be used for fuel distribution, dual-carburetor arrangements, or other hose-routing layouts where a three-port connection is required. The barbed ends are designed for push-on fuel hose connections, while the included clips help secure the hoses at the fitting. The fitting has an outer diameter of 8mm / 5/16" and an inner diameter of 6.5mm / 1/4". Three-way fuel hose connection The tee supports practical fuel-line service without changing carburetor calibration components such as jets, emulsion tubes, or float-level hardware. It is suitable for many carburetor applications, including systems using Weber, Dellorto, Solex, or Keihin carburetors, provided the hose interface and available clearance match. This replacement part is suitable for carburetor service and restoration work where the original component is worn, damaged, or missing. Reference/MPN: ST2502. Technical role: Brass three-way barbed tee for joining and branching 8mm/5/16-inch fuel hoses in a carburetor fuel system. Service relevance: Supports fuel-line routing or distribution service and includes three clips to help secure hoses without altering carburetor calibration components. What Is Included One brass three-way fuel hose tee, MPN ST2502Three hose clipsFuel hose fitting size: 8mm / 5/16" outer diameter and 6.5mm / 1/4" inner diameterMade in EU. Important Fitment Note Verify the carburetor and fuel-system family, the ST2502 code, and the required hose size before installation. Check that the existing hose matches the 8mm / 5/16" fitting interface and that the three-way barbed geometry suits the intended routing. This is a push-on hose-barb tee, not a threaded or tapered-seat fitting, so confirm that the system does not require a different thread, flare, gasket, or seat style. Compare the tee, hose bore, port direction, and overall clearance with the removed fitting before purchase. Always verify the hose interface and routing against the original part before installation.What you see is what you getShow all parts