MALPASSI FILTER KING 85mm Fuel Pressure Regulator injection carburetor return
$ 151.2
Part number: FPR85BR
Made in: Italy
Malpassi Filter King 85mm Fuel Pressure Regulator with Filter and Return Line – FPR85BR
This Malpassi Filter King bypass/converter regulator controls fuel pressure for naturally aspirated carbureted engines and includes an integrated fuel filter, alloy bowl, and return circuit. It is intended for Weber, Dellorto, and Solex carburetors, including installations using Facet fuel pumps. The bypass design returns excess fuel to the tank or return circuit, helping maintain consistent fuel pressure and adequate flow through changing engine demand, including acceleration, deceleration, and cornering.
The regulator can be used with low-pressure carburetor pumps or with higher-pressure injection pumps when converting a fuel-injected system to carburetion. Its pressure setting range is approximately 0.05 to 0.4 bar. The unit uses a composite diaphragm and a paper filter element, with one 8 mm inlet tail, one 8 mm outlet tail, and one 8 mm return tail. It is compatible with alcohol-based fuel including E85.
Bypass regulation with integrated filtration and an 8 mm return connection
The alloy-cast housing and alloy filter bowl provide the main regulator and filtration assembly, while the return path helps prevent excessive pressure reaching the carburetor fuel inlet. Incorrect pressure, restricted filtration, or a blocked return circuit can contribute to fuel-level errors, poor idle quality, hesitation, or inconsistent transient response. The regulator is hand assembled and tested for operating precision.
This replacement part is suitable for carburetor service and restoration work where the original component is worn, damaged, or missing.
Reference/MPN: FPR85BR.
Technical role: Bypass fuel-pressure regulator with integrated filter for carbureted fuel systems using an 8 mm inlet, outlet, and return connection.
Service relevance: Supports consistent carburetor fuel pressure while filtering fuel and returning excess flow through the return circuit.
What Is Included
- Malpassi Filter King FPR85BR fuel pressure regulator with integrated fuel filter and return line
- Paper filter element
- Alloy filter bowl
- Mounting bracket
- Mounting bolts
- Made in Italy.
Important Fitment Note
Verify the carburetor family and fuel-system layout before installation. Confirm the FPR85BR marking, the three-port configuration, and the 8 mm inlet, outlet, and return tails. Check hose routing so the return connection leads to a suitable return circuit and the regulator is installed in the correct flow direction.
Compare the regulator’s port geometry, hose-tail interface, mounting bracket position, and available clearance with the removed component or the intended installation location. Also verify the required pressure range for the carburetor, pump type, fuel, and naturally aspirated application.
Confirm the port arrangement, 8 mm hose interfaces, pressure requirement, and return-line provision before fitting.
What you see is what you get
Show all parts